Engineering

Theory Of Structures MCQs: 15 Questions & Answers in Engineering

15 Theory Of Structures MCQs in Engineering with answers & explanations. Practice objective questions for competitive exams, interviews & self-assessment — f… Use the answer toggle below to show or hide all solutions, tap an option to check one question, or open a question for its own page.

Page 1 of 1

Show answers

Answers hidden — tap an option or use “View Answer” on each question.

Theory Of Structures MCQs: 15 Questions & Answers in Engineering

A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be

Principal planes are subjected to

Y are the bending moment, moment of inertia, radius of curvature, modulus of If M, I, R, E, F and elasticity stress and the depth of the neutral axis at section, then

A masonry dam (density = 20,000 N/m3) 6 m high, one meter wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be

A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is

The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is

The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is

The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is

The deflection of a uniform circular bar of diameter d and length L , which extends by an amount under a tensile pull W, when it carries the same load at its mid-span, is

A three hinged arch is generally hinged at its supports and

Shear strain energy theory for the failure of a material at elastic limit, is due to

The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2, the depth of the joist, is

A short column (30 cm × 20 cm) carries a load P1 at 4 cm on one side and another load P2 at 8 cm on the other side along a principal section parallel to longer dimension. If the extreme intensity on either side is same, the ratio of P1 to P2 will be

A compound truss may be formed by connecting two simple rigid frames, by

Study tips for Theory Of Structures